Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Mfim 50b does not boot after upgrade failure 2

Status
Not open for further replies.

nitram11

Technical User
Nov 21, 2005
55
DE
Hello,
have try to upgrade LIK 50b from 5.0 to 6.0 ; after uplode kernel.rom file succesful mfim asked for restart; at that time the second (appl. file) was not load up; after restart mfimm does not boot up anymore; all 8 leds are on without flicker after power up; web interface had suddenly lost contact and does not work anymore ; i try to reach mfim over serial cabel/telnet and hyperterminal (10.10.10.2:5003) does not work; all dip switch settings try; is there a possibility to erase/overwrite back rom ? or any other idear for contact to mfim ? i have heard something is possible over tftp protocoll ?

Thanks for all idears
 
Hi

I think you may be slightly stuck here! Going from 5.0 to 6.0 requires going to 5.5 first which includes a meta file uploading first. When at 5.5 you can then jump straight to 6.1 by-passing 5.6 and 6.0.

There are recovery files and procedures but these are normally completed by the LG supplier in your country.

Eats



Ok, Press Trans *#..... TRANS/PGM..... the transfer key?.......sigh!
 
Thanks a lot, eats + dave; meanwhile i found the procedure in pragma foren [mad] this is , was we call instruction money; will get in contact with a german LG supplier; any idear, what this will cost ?

Thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top