papabear762
Programmer
We have connected to a Merlin Messaging R4, and the login prompts come up. Then won't let us type anything. Any ideas?
Thanks for the input, guys.
John
Thanks for the input, guys.
John
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
messaging serial connection
- Thread starter papabear762
- Start date
- Status
tdaugirdas
Technical User
Is your configuration in Hyperterminal correct? Baud rate should be set to 38400, data bits: 8, Parity: none, Stop bits: 1, Flow Control: none.
When prompted for the login, type in: sysadmin
When prompted for the password: type in: the admin mailbox password.
You should not change any other default settings in Hyperterminal.
You should be using a DB9 serial cable from the computer serial port to a DB-25 adapter to a 355AF adapter and then a straight-thru LAN patch cable from the 355AF adapter to the RS232 port on the Messaging module.
Tom Daugirdas,
President
STCG, Inc.
stcg.com
When prompted for the login, type in: sysadmin
When prompted for the password: type in: the admin mailbox password.
You should not change any other default settings in Hyperterminal.
You should be using a DB9 serial cable from the computer serial port to a DB-25 adapter to a 355AF adapter and then a straight-thru LAN patch cable from the 355AF adapter to the RS232 port on the Messaging module.
Tom Daugirdas,
President
STCG, Inc.
stcg.com
- Thread starter
- #3
papabear762
Programmer
My guy had a pc problem. The connection was good. But thanks for your post Tom.
John
John
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question