Messaging on MX-One 3.1

[TeleLion]

I have a problem with Onebox, MX-One 3.1 Legacy lim 3 IPLU/1 R3A, Onebox on ericsson 19" server unit:
1. Lines go on hawk and then after a minut they are out of service.

2.The documnetation still mentions IPBOI!!!!!!!!! does any one have the right commands and procedure to do this?

TELEC3

 

[whosrdaddy]

1) upgrade you IPLU to R3C, see if that helps

2) IPBOI is no longer needed, as the server acts as gatekeeper. You only need to add IPLU boards, the act as RTP resources (initiate with media_gateway_interface)
point the OB to the eth0 address of your server.

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[TeleLion]

Working fine now, it was the settings of the proxy sip server and register server on the onebox side, thanks.

TELEC3

 

[TeleLion]

am calling my main hunt group number xxxx and am getting the message "am sorry extension xxxx does not answer", if i call the ports in the huntgroup directly it works fine.

TELEC3