Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Messager MP3
- Thread starter atektalk
- Start date
curlycord
Programmer
What type of system?
Go here and look it up under wiring for harware:
As for Programming you need to know Config Password and how to navigate through programming, then look for On Hold and choose Music.
Go here and look it up under wiring for harware:
As for Programming you need to know Config Password and how to navigate through programming, then look for On Hold and choose Music.
- Thread starter
- #3
The info i found from your link was useful, but not clear. I tried looking for the "lug cable" and could not find any !
I there also some place where there would be a circuit diagram, with some more explanation on how to connect the music on hold device to my norstar unit.
I there also some place where there would be a circuit diagram, with some more explanation on how to connect the music on hold device to my norstar unit.
lugerlover
Programmer
hook output cable to said pair...split output cable first
First you need to know what system you have is it a cics, modular 8X24 or 0X32 all are diffrent when you have that look in the manual under wiring to see what pair is the Moh then you have to use the head set of the MP3 cut the end and wire that into the pair that correspond to Moh then go to orogramming and activate MOH to yes
- Status