Message Waiting over QSIG

[PeterM1952]

Hi Has anybody Set-up message waiting over QSIG I would like to use the Nortel Call Pilot connected over a QSIG to the Avaya to notify and Cancel Mesage waiting lights on the Avaya

 

[PeterM1952]

I can now close this thread as I have this enabled and working. Please see the following as this may assist if anyone else needs to do this.
QMWI needs to Set up on the Link in the RCAP in LD 17 I have posted the one of the ones we have set this allows the MWI.
The Meridian also has to to be enabled with the correct Packages and Enhanced networking for the correct ISGF level of QSIG Also the correct patches have to be loaded for the relevant software level

CTYP MSDL
DNUM 15
PORT 0
DES AVAYA_QSIG_1
USR PRI
DCHL 6
OTBF 32
PARM RS422 DTE
DRAT 64KC
CLOK EXT
IFC ISGF
PINX_CUST 0
ISDN_MCNT 300
CLID OPT0
CO_TYPE STD
SIDE USR
CNEG 1
RLS ID **
QCHID YES
RCAP COLP NDI CCBI CCNI PRI DV3I CTI QMWI
PR_TRIGS DIV 2 3
CNG 2 3
CON 2 3
PR_RTN NO
MBGA NO
OVLR YES
DIDD 0
OVLS YES
OVLT 0
T310 120
T200 3
T203 10
N200 3
N201 260
K 7
If you Have QSIG enabled on the Avaya then it is fully featured
The Avaya settings from the document in the attached Link need to be set

http://www.avaya.com/master-usa/en-us/resource/assets/applicationnotes/qsig-msg-succ.pdf