Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Message waiting lamp 2

Status
Not open for further replies.

radrman

MIS
Dec 14, 2003
66
US
Phone Set 3904
I have 5 phone sets configured as follows:
key 0 mcr xxxx where x =DN for help desk
key 1 scr xxxx where x =DN for user personal line
key 2 scr xxxx where x =DN rollover for Personal DN

I have all 5 sets configured with HTA, MWA, FNA

FDN 8001
HUNT 8001
16 MWK 8001

But only 1 phone set will display message lamp.

what do I need for all phones to display message lamps for both Help desk and Personal messages?
 
THe folowing message was received when trying to change key 16 to xmwk.

SCH1371
"On the M3903, M3904, and M3905 MWK is reserved for key 16. No other
mnemonic except NUL can be configured on this key.
 
Key 16 stays as MWK. Pick another key and make it XMWK.
When there is a message waiting, the symbol will be lit beside the key. It will not show on the message waiting light.
 
If you have meridian mail you can add all 5 ext in to help desk mailbox under message waiting indication DN and this will do the trick, but if you do it this way they will not know if message is from help desk or personal DN this is only for older RLS with new RLS you can do what dnc16 sad just pick up any other key and key 16 will show personal line messages and the other key will show help desk messages.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top