Hi,
When sending email to specific contacts in AD the system recognises them as GWISE address but tries to send them over SMTP. I can see them hit the Mailsweeper box. The GWISE connector is not on the RGMaster but on a different server. Incoming mail and dirsync works fine over the connector.
Any ideas?
The following is from the MsExchangeTransport logging:
Event Type: Information
Event Source: MSExchangeTransport
Event Category: Routing Engine/Service
Event ID: 984
Date: 10/06/2003
Time: 17:13:11
User: N/A
Computer: RGMASTERSERVERNAME
Description:
SMTP GetNextHop returned hr=0x0 in 0ms.
DestAddr=<$MSGWIA$.GWISE.*>, Type=<SMTP>
MsgType=0x1c, NextHopType=SAME_ROUTING_GROUP
Type=<SMTP>, Class=<*>, SchedId=0x0
RouteAddr=<CONNECTORSERVERNAME>
Connector=<082ceb34-48e9-46a0-b7fe-0b87d28be3f2>
When sending email to specific contacts in AD the system recognises them as GWISE address but tries to send them over SMTP. I can see them hit the Mailsweeper box. The GWISE connector is not on the RGMaster but on a different server. Incoming mail and dirsync works fine over the connector.
Any ideas?
The following is from the MsExchangeTransport logging:
Event Type: Information
Event Source: MSExchangeTransport
Event Category: Routing Engine/Service
Event ID: 984
Date: 10/06/2003
Time: 17:13:11
User: N/A
Computer: RGMASTERSERVERNAME
Description:
SMTP GetNextHop returned hr=0x0 in 0ms.
DestAddr=<$MSGWIA$.GWISE.*>, Type=<SMTP>
MsgType=0x1c, NextHopType=SAME_ROUTING_GROUP
Type=<SMTP>, Class=<*>, SchedId=0x0
RouteAddr=<CONNECTORSERVERNAME>
Connector=<082ceb34-48e9-46a0-b7fe-0b87d28be3f2>