Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Message only mailbox? NuPoint (MiCollab)

Status
Not open for further replies.

PokerMunkee

IS-IT--Management
Aug 26, 2010
12
US
Trying to setup some "information" only mailboxes that we can record to and no one can leave a message. Basically, call x1001 and it will tell you what today's special at the restaurant is and then hang up.

I thought I would go under Call Director and create the create a Mailbox 1001 under Call Flow. I saved a message under it but when I dial x1001, it just goes to my NuPoint's main phone tree.

Can someone point me in the right direction?
 
Well, figured it out 5 mins after posting!
I had the wrong call of service attached to the mailbox in NuPoint. It needed to be call director.
 
While Call Director can be used for this purpose, it is a little more difficult with respect to rerecording greetings.

There is a default FCOS 6 called Greeting Only MB.

You might want to try that.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top