Message Notification over PRI

[dnsincomminc]

I have a customer that has a MICS w/ 2 PRI circuts. They want to use pager notification but are unsure which pool to send the call out on. Pool 1 sends it over the four backup lines that are in pool A. Any ideas.

Dan Schollian
In Communications

 

[jerryreeve]

You need to use an invalid pool (a pool without any lines such as pool 6) then when the call is attempted to transfer out it recognizes that there are no outside lines available and then goes to call routing to handle the call.

JerryReeve
Communications Systems Int'l
com-sys.com

 

[DTone]

You can have it go out on any pool that you want(or Line). I use the pool that is used the least. How big is the voice mail and how often will it be used? If alot you should increase the number of paths out.(Enter PSWD for V.Mail and press 5)

KDB

 

[dnsincomminc]

Thaks for the help, I will give it a try.

 

[evB]

I have had success with this same scenario by using Line Pool 15, this represents the PRI lines pool. Try this.

EvB