Message Networking CS1K to BCM400. Have tried just about everything

[againwiththis]

Hello.

Trying to forward and transfer messages from BCM400 to CS1k/Call Pilot. Works BCM to CS1K but not other way around.

Have MCDN, AMIS/VPIM keycodes installed.

What am I doing wrong???

Thanks

 

[curlycord]

Already posted here:

http://www.tek-tips.com/viewthread.cfm?qid=1541597&page=1

=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[againwiththis]

Yes, I cross posted here CS1K and BCM forums. Appologies if that is bad form.