Mermail failure + low voltage?

[M1north]

Anyone know if these errors show any indication towards the enhanced card or the hard drive? Theres only 2 components and we have replaced the card already. Hard drive is doing regular backups.

Also, if a low voltage condition is experienced on an OPT11C cabinet would the mail card be the first thing to fail? I wasnt able to find the LV dropout on the cards.

I`m wondering if a suspect power supply could cause a voltage drop and make the card go XMI001 and lock up the hard drive randomly.

Any thoughts?


TIM000 16:00 13/7/2010 CPU 0

DTC103

AUD000

DTC103

ERR5234 AML:9 PRIO: 12

TIM000 16:32 13/7/2010 CPU 0

DTA100 10 0 0 8 8

DTA100 10 0 0 1 8

DTA100 10 0 0 4 8

XMI001 10 MMAIL

FHW001 9 SDI DEVICE RESPONSE TIMEOUT

BERR705 EXC 0: Bus Error in Task "tSL1" (0x203d3b30)
SR=0x3000, PC=0x10e44324, Addr=0xb000ca44, SSW=0x85

XMI002 10 MMAIL

FHW005 9 SDI DEVICE HAS BEEN AUTOMATICALLY DISABLED

 

[pcat200]

Hard to say. It almost seems like the AML link burps, causing the agents to disable, and putting garbage on the bus. If I remember right, the AML is via the back plane to the SSC card, isn't it? Could it possibly be a faulty SSC SDI port? Does the system recover by itself?

 

[M1north]

NO, we have to hit the reset on the mail card and the HD boots and loads up.

When onsite, the green LED is lit solid on the mail card.

 

[pcat200]

That sure makes it sound like the Mermail having the issue. I would probably change out the power supply just to eliminate it from consideration.