Merlin Mail (MLM007) in DOS mode 1

[brewerdude]

I recently setup a Merlin mail so that it can be dialed into via port 7 on the card. When I dial in, I go into Concurrent DOS rather than the read-only admin program. Any ideas on how I get to the admin program from there??

 

[exsmogger]

You should get a password prompt when you connect to the internal modem. Try the 6-digit serial number on the 007 as the password.

Brian Cox

http://www.jandjcommunications.com

 

[brewerdude]

It blows right by the prompt and we get the following:

Concurrent Error: Can't Find Command
Command = z
1D>


The 1D> is the command prompt for Concurrent DOS. There are several commands I can type (like HELP, DIR, SHOW, etc..) but is there something I can run/type to get to the voicemail's read-only interface??

 

[exsmogger]

Try mm <enter> for the main menu.

Brian Cox

http://www.jandjcommunications.com

 

[brewerdude]

That did it.

You are da man!!

Thanks!

 

[exsmogger]

You're very welcome.

Brian Cox

http://www.jandjcommunications.com