does anyone out there have an example on how to setup 2 merlin magix with ina boards? I have a customer currently that has this setup and was using the ethernet for the remote location via a point to point t1, we moved the remote system several months ago and now they wanted the data side reconnected, well, guess what, the remote lost all of the info except for the ip address, can anyone help with this?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Merlin Magix INA programming
- Thread starter IPOguy
- Start date
Are you saying that the MAGIX lost its programming?
If so, you should be able to use one of the AUTO BACKUP files to restore it.
If so, you should be able to use one of the AUTO BACKUP files to restore it.
- Thread starter
- #3
I wasn't able to copy the link, however, if you go to avaya.com and do a search for:
"MERLIN MAGIX Integrated System Integrated Network Access (INA) Module Installation and Configuration Guide"
you should find what you are looking for.
"MERLIN MAGIX Integrated System Integrated Network Access (INA) Module Installation and Configuration Guide"
you should find what you are looking for.
this is the link Merlinman refers to
Joe W.
FHandw., ACSS
insanity is just a state of mind
- Status
Similar threads
- Locked
- Question
- Locked
- Question