Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Merlin Legend

Status
Not open for further replies.

curiousgbjr

Technical User
Oct 4, 2017
5
US
I got a Merlin Legend dropped in my lap. My customer wants to set up a second receptionist, a duplicate of the first. I haven't a clue where to begin (I am an NEC guy.). I have a manual and have found the WinSPM. Any help would be appreciated.

George
 
You're in for a wild ride. Operator positions can only be put on certain ports on certain cards. You need to free up the next available operator port, do a print of your existing operator, then add the new one. Then probably reconfigure both operators. You might want to engage Merlinman to support you remotely to do it.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top