Merlin Legend Slot Arrangement??

[NyghtTech]

HI i have a merlin legend R7 V14.2 system.Here are the Modules i have now

SLOT1. 408 GS/LS-MLX
SLOT2. 408 GS/LS-MLX
SLOT3. 408 GS/LS-MLX
SLOT4. 400 GS/LS/TTR
SLOT5. 012
SLOT6. 008-MLX
SLOT7. 016 ETR
SLOT8. 016 ETR
SLOT9. 016 ETR
SLOT10.012

My question is we are gonna take out one of the 408-mlx cards and put an ID card in.Can i take the one i took out and put it in the slot after the 012 card in the second carrier or is there a specific order they have to go in like mlx then etr cards and so forth?

 

[telecomtekperson]

With that config, it wont matter if you put a 408-id in slot 6. You do not have any line cards after it, so it wouldnt goof anything up. If you wantes to replace one of the 408 gs/ls/id-MLX that will not affect anythin either. All you would be doing would be adding caller ID.

IF YOU were to put a 008 where a 408 was, then it would mess up your numbering a little bit.