Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Merlin Legend Ring Tone

Status
Not open for further replies.

Jim E

Technical User
Jun 6, 2017
77
US
I'm running a Legend Rel 7 in my home. When the ATL sets ring on incoming calls, it is the exact ring tone from the selected ring options. On the MLX sets, regardless of the ring selected, a single 'beep tone' is added at the end of the selected ring. Is this extra beep controlled by a setting? can it be turned off? Could not find it mentioned anywhere in the 3 volumes of legend manuals I have.
 
One long ring indicates an inside call
One long ring plus one short ring (beep) indicates an outside call
One long ring plus two short rings (beeps) indicates a transferred outside call or a returning transfer
One long ring plus three short rings (beeps) indicates a returning callback call
 
Thanks for the quick reply... someone is still knowledgeable of this old but reliable system!! Thanks for solving.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top