Can an AT&T MLC-6 cordless phone work on a Legend (rel 7.0) system? I'm guessing I'd have to plug into a 408 GS/LS ATL card, and program as a 5 button Merlin set. The only documentation I've been able to find is using the MLC-6 with a Partner system. Thanks for checking!!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Merlin Legend and MLC-6
- Thread starter Jim E
- Start date
teletechman
Technical User
I seem to rememebr it will work but the only way to know is to test it. By the way you would be better off with a transtalk cordless like a 9040.
Mike
Mike
- Thread starter
- #3
UPDATE: I read on Avaya's site that the MLC-6 can only be used with a Partner or Partner Plus system. I'm running a Merlin Legend 7.0, and read on another post that since an ETR card emulates the Partner system, I should be able to plug the MLC-6 into the ETR card and have it function.
Can anyone confirm this? My user has a preference for the MLC-6 because of the color and it is self-contained (transmitter and receiver are all one unit).
Thanks.
Can anyone confirm this? My user has a preference for the MLC-6 because of the color and it is self-contained (transmitter and receiver are all one unit).
Thanks.
teletechman
Technical User
Just make sure they know that it will have a more limited range than the transtalk. If they work as a partner phone then it will work on the ETR card.
Mike
Mike
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question
