I am getting a new PRI installed this month. The Telco has asked me to fill out a PRI check list. How should I have them set the PRI up. Specifically, Telco is Logix. I read the archives and all I see is B8zs, ESF, Custom. This seems to be too simple. I am a Nortel head...Please help. I know to change the ICOM number to the recieve digits to make the phone ring etc. Just the PRI set up is new for me. Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Merlin Legend 7.0 PRI configuration
- Thread starter nuklhead
- Start date
telecomtekperson
Vendor
Advise them as to how many digits to send. There is a good FAQ for setting up a PRI on the legend.
On the Merlin Magix you want to have B8ZS, ESF, and an AT&T custom protocol. You want them to send you the last 4 digits of the numbers dialed. You have 16 PRI conversion tables to play with (0-15). The Magix is capable of doing bulk conversions so you will have to number them accordingly.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question