Meridian PDT commands

[jlk53]

I have an 11C test switch that I am learning on. I know that PDT is a sensitive subject. I can access PDT as I do have the password. I am trying to access the Loads. At the PDT> prompt, I type sl1input and hit enter. The curser drops down a line and starts flashing but does not take me into the loads. Can someone tell me what I am doing wrong.

Thank you

 

[galifax]

Try to enter "symload" first.

 

[khiv]

Hit the enter twice

 

[johnpoole]

that is not the command to access loads,, contact your vendor direct or nortel, anyone post with secure pdt commands will be removed.. i've already been warned

john poole
bellsouth business
columbia,sc

 

[joebacon]

John is right, if your learning there is plenty to learn in the umpteen loads that you access by logi and the password.

 

[Firebird Scrambler]

pdt = Problem Determination Tool. Don't go into it, unless the have a problem & you have the knowledge to fix it!.
It's meant to be used by Specialist engineers only, as has been stated in the other replies.

All the best

Firebird Scrambler
Meridian Programmer in the UK

http://mysite.freeserve.com/firebird_scrambler

 

[phannah]

While we are on this topic, does documentation exist covering PDT, or is it only available in a Nortel class?