MERIDIAN OPTION 61C CONNECTED TO MD110

[length]

I have the following scenario,

A network consists from one Meridian option 61c and 2 MD110 (BC8). the case is that the option 61C is connected to MD110 #1 (this act is a transit exchange) to be connected to another MD110.

if we call from meridian to MD110 #1 , we can see the caller no. on the display, but if the meridian callers call to MD110 number 2 THROUGH MD110 (1) we see "private " "no number at the display is shown", while if we call from the MD10 #1 or MD110 #2 towards the Meridian the number is shown on the display.

"SO WE CAN'T DETECT THE NUMBER IF WE CALL FROM MERIDIAN TO MD110 #2??)

These are the used parameters:
1- Rout from MD110 (1) to Meridian configured as the following
ROCAI: ROU=72,SEL= 012000000000,TRM=5,SERV=2110000010,TRAF= 00151515,SIG= 111101000031;
RODAI: ROU=72,TYPE=SL60, VARI=15400000,VARO=06400000,VARC=00000310;
RODDI: DEST=XX, ROU=72,ADC= 0606100000000250,TRC=0;


Rout from MD110 (1) to MD110 (2)
ROCAI: ROU=70,SEL=12000000000,TRM=5,SERV=2110000010,TRAF= 00151515,SIG= 111101000031;
RODAI: ROU=70,TYPE=SL60, VARI=15400000,VARO=06400000,VARC=00000310;
RODDI: DEST=XX, ROU=70,ADC= 0606100000000250,TRC=0;


1-Rout from MD110 (2) to MD110 (1)
ROCAI: ROU=77,SEL= 012000000000,TRM=5,SERV=2110000010,TRAF= 00151515,SIG= 111101000031;
RODAI: ROU=77,TYPE=SL60, VARI=15400000,VARO=06B00000,VARC=00000310;
RODDI: DEST=XX, ROU=77,ADC= 0606100000000250,TRC=0;


Is there any idea to resolve this problem or recommended parameters for such network if any one has a similar scenario.
Regards

 

[length]

what's up guys!!!!!!!!!!!!!!!!1