Meridian OPT 11C not saving configuration

[pleskuk]

Hello,

I was changing the DN name on Meridian OPT 11C and everything works fine, but after a power failure the name is back to the old name before the change.

After a investigation I've noticed that in ld 43 the database is old. Here is the Output:

----------------
.dat
DATABASE ISSUE DATE(d/m/y)/TIME SIZE(recs) SEQNO
Main database not accessible.
Secondary database not accessible.
IntBackup 400T 19/10/2009 at 01:00:40 44 2690
PCMCIA database not accessible.
Current external backup is on PCMCIA drive B
-----------------

When i try to do EDD i get this error:

-----------------
.edd

DB SEQ NUM = 2694
CONFIG
.
EDD007
------------------

On some posts I've seen that i need to try "edd clr" and if this fails that there is a hardware error, but there are some posts that say this is very dangerous. Any tips what to do?


Regards

 

[GHTROUT]

Nah, go for it. It can't get any worse than not being able to backup.

--
Nortel Resources at GHTROUT.com
--

 

[Firebird Scrambler]

Your daughterboard is corrupted and the software needs to be reinstalled. Try..

ghtrout.com - This website is for sale! - ghtrout Resources and Information.

This website is for sale! ghtrout.com is your first and best source for all of the information you’re looking for. From general topics to more of what you would expect to find here, ghtrout.com has it all. We hope you find what you are searching for!

www.ghtrout.com

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.