Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Meridian Max
- Thread starter lynmar
- Start date
what release and do you want the documents"NTP's"
Pat Guido
NEXTIRAONE
Pat.guido@nextiraone.com
Formerly Nextira, formerly Williams Communications, formerly Wiltel, formerly Nortel networks, formerly Northern Telecom, formerly, Nynex meridian systems formerly Northern Telecom.
Pat Guido
NEXTIRAONE
Pat.guido@nextiraone.com
Formerly Nextira, formerly Williams Communications, formerly Wiltel, formerly Nortel networks, formerly Northern Telecom, formerly, Nynex meridian systems formerly Northern Telecom.
- Thread starter
- #3
Supportvzla
Technical User
In LD 23 you have a block (ADS or CBS,I dont remember exactly). There you will find the range for agent IDs (From IDLB to IDUB).
Then you have to enter the MMax, go to Parameter Administration, then to Agent Definition and fill each column (Agent ID, Name).
When you assign an agent Id, the only thing that you should be aware of is that the ID is not already assigned, and that can be found in this section
supportvzla
Then you have to enter the MMax, go to Parameter Administration, then to Agent Definition and fill each column (Agent ID, Name).
When you assign an agent Id, the only thing that you should be aware of is that the ID is not already assigned, and that can be found in this section
supportvzla
- Status
Similar threads
- Locked
- Question