Meridian loops

[HVehari]

Hi,
I have printed in LD 97 loops but can't understand at all
below is the print. Can some one explain how to extract
information from this print.
Thanks a lot

with best regards,
HVehari


LD 97
SCSYS000
MEM AVAIL: (U/P): 1216966 USED U P: 109226 50063 TOT: 1376255
DISK RECS AVAIL: 438
REQ
AUD000
PRT
TYPE XPE
XPEC

S0 S1 S2 S3 LOC DIS RGTP

01 000 000 NO 08
02 004 004 NO 08
03 008 008 NO 08
04 012 012 NO 08
05 016 016 NO 08
06 032 032 NO 08
07 036 036 NO 08
08 040 040 NO 08
09 048 048 048 048 NO 08
10 044 044 044 044 NO 08
11 064 064 064 064 NO 08
12 068 068 068 068 NO 08
13 072 072 072 072 NO 08
32 128 128 NO 08
33 128 128 NO 08
34 132 132 NO 08
35 132 132 NO 08
36 136 136 NO 08
37 136 136 NO 08
38 140 140 NO 08
39 140 140 NO 08
40 144 144 NO 08
41 144 144 NO 08
42 148 148 NO 08
43 148 148 NO 08
44 152 152 NO 08
45 152 152 NO 08
46 156 156 NO 08
47 156 156 NO 08

REQ END

 

[Phonz]

sure,

across the top of the print is "SO S1 S2 S3 LOC DIS RGTP"
these are the segments of your IPE shelves, and you can segment each shelf 4 times. the loc is just a designator, ie: COM2, could mean column 0, module 2. Dis means simply disabled, yours all have no under them so they aren't disabled, and the RGTP is ring type, 8 is common but 16 is also used.
Down the left side are the controller numbers, you have 1 - 47.
I would read yours for instance:

controller 2 has superloop 4 on the first 8 slots on the left side of the shelf (2 segments), whereas controller 9 has all 4 segemts or the whole shelf as superloop 48!

does this help?

 

[HVehari]

Hellow Phonz thank you for your reply. I get some idea.
What is a super loop. Is it means a card?. As you said controller 2
has super loop 4 while controller 9 has superloop 48.
How many superloops option 11 could have and how these are assigned to the system.

HVehari

 

[Phonz]

option 11's are different from other meridians. each card slot in an 11 emulates a superloop. a superloop is 4 loops and needs a network (superloop) card vs a standard loop that uses a e-net card. superloops are divisible by 4 so ie: 4,8,12,16,20 and so on! i would need to know if you have an option 11 or other!

 

[HVehari]

We have option 11C with one main cabinet and one expansion
cabinet
In main cabinet order of the cards are
Power supply
NTDK20FA
NTCK16BE
NTCK16BE
NT8D02GA
NT8D02GA
NT8D02GA
NT8D02GA
NT8D02GA
NT8D09AL
NT6R16AA Rls 12 Meridian Mail

In expansion Shelf the order of the cards are
Power Supply
NTDK23BA
NTCK16BE
NTCK16BE
NTCK16BE
NT8D02GA
NT8D02GA
NT8D02GA
NT8D02GA
NT8D02GA
Last 02 slots are empty

HVehari