Meridian console

[Trybo]

I've installed an M2250 on site, it is the 3rd console.
I have set it as ANUM 3. When it dials the other two consoles, it dials 001 or 002 and gets through to them (their displays read "003").
When either of the consoles attemp to call 003 though they get a fast busy.
I removed the console and rebuilt it on another card, in a different stack, same thing happens.
Any ideas why the consoles cannot call 003?

 

[KCFLHRC]

Is it in Position Busy?

 

[Trybo]

No. She can accept calls from the outside

 

[KCFLHRC]

Print out console 1 and 2 and see what is different. You may have to assign an IADN to the new console.

 

[Trybo]

I have it as an exact match for both the other consoles. None of them have an IADN assigned to them.

 

[Trybo]

I actually went line by line and compated them. The only difference is the TNs and the ANUM

 

[KCFLHRC]

I wonder if their is an Attendant Console Group defined in LD 93?

 

[Trybo]

I haven't seen that before. I'll take a look at it.

 

[Trybo]

I don't have a LD 93 - I'm at RLS 25.40 B

 

[KCFLHRC]

My Rls 23 books have LD 93

 

[Trybo]

I got it working. I replaced the NT8D02 card and it now works. Don't whether it was the card itself, or it just needed to be reseated.
The results are all that matters.
Thanks for your assistance KCFLHRC.

 

[KCFLHRC]

Weird, oh well, glad it's working