meridian 61c need to increase the number of rings before going to voic

[mechanic2]

I need to increace the number of rings from 4 to 6 before going to voicemail in a meridian 61c system. The system is set for 4 rings, one person wants 6.

 

[senk1s]

set the values of CFNO in ld15 in RDR_data

vary the values of RCO in the set programming ld 10

search the forum, there was a detailed thread

(refer the thread ... i posted this in the wrong thread ...)
i should figure out how to link a thread !!

 

[serge9]

print the Phone Tn
check the RCO
if rco 1
changed to 2 or three or ..
i do not know how your system is programed
but if you increase the rco value
you will increase the numbers of rings

 

[johnpoole]

in ld 21 prt rdr data, that is where your fna/rcno number are defined
RDR_DATA
OPT CFF CFRA PVCD CWRD
FNAD FDN
FNAT FDN
FNAL FDN
CFTA YES
CCFWDN
CFN0 3
CFN1 4
CFN2 6
DFN0 4
DFN1 4

in this 81 for 6 rings i use rco 3.. might need to set that up, but note that a chnage here will effect stations using that table.. if i change cfn1 to 8, all phones with rco 1 will go from 4 to 8, not just the next phone i change

john poole
bellsouth business
columbia,sc