Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Meridian 1 printer

Status
Not open for further replies.

ctd31

Technical User
May 6, 2014
6
US
Just took over a Meridian 1 system having a tractor drive Epson LX-300-ii printer. Display screen shows "printer:None" I assume print has been turned off. I have the printer working but cannot find where to turn print on. Any thoughts? Thanks in advance...
 
What type of terminal is the printer connected to? VT 520 is CTRL F2
 
It is a VT520 terminal I have tried CTRL F2, does not turn on print.
 
Well, that's the command. Maybe the printer is off line. Some printers there is a button for on line. There is also configuration in the VT 520 for whether the printer is turned on for a particular session.
 
Just found out someone changed the VT 520, I went into set up and discovered the printer had never been configured. That was the problem. It always helps to know a little about the history. Thanks everyone I appreciate your input. Everything is working now.
 
As phone people we sometimes have to be detectives too.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top