Meridian 1 option 81C question

[jmedms]

I have a option 81C version 3011 Release 25. I need to do a audit on my switch. How can I check the Port count on my PBX and Meridian mail? Any help on this would be great.

 

[gregdeike]

In Load 22, due a SLT at the request prompt. That will tell you how many you have and how many you have used.

 

[kcfonman]

The best way to get an inventory or all you cards and digital sets is use the PBX Inventory system in LD 117. It will give you a lising of all TN's prgrammed and also check the status of a digital set at the end of the wire. (This will show you the sets programmed without stations or crossconnects.

It is best to run this command early in the moring or late in the evening. DO NOT RUN during you peak period. It will slow the machine down. You need to have a capture file open to print this list. It is large. It will have all the IPE, Network, MSDL, IGS or FIJI, and Core cards. If you can IDU it you can inventory it.

Jerry

Here are the commands;LD 117

INV GENERATE ABORT Abort any currently running Inventory generations.
INV GENERATE ALL Requests for the Inventory feature to begin generating
both the card and telsets Inventory file.
INV GENERATE CARDS Requests for the Inventory feature to begin generating the
Inventory file for all of the cards in the system. The
generation produces an inventory file with all of the cards
configured on the system. Those cards that are present in
the system and have card ID are noted in the inventory file
with their card type, TN, and card ID. Those cards that do
not have card ID or are not present in the system, will be
noted to be “Unavailable” in place of their card ID.
INV GENERATE SETS Requests for the Inventory feature to begin generating the
Inventory file for the digital telsets with their telsets’ IDs
that have been configured in the system. Those telsets
that are present in the system and have sets ID are noted
in the inventory file with their sets type, TN, sets ID, DES,
Primary DN. Those telsets that do not have sets ID or ar
not present in the system will be noted to be “Unavailable”
in place of their sets ID.
INV PRT Refer to INV PRT STATUS command.
INV PRT ALL Requests for both the Card Inventory file and the Sets
Inventory file to be printed out to the output destination
(i.e. TTY).
INV PRT CARDS Requests for the Card Inventory file to be printed out to
the output destination (i.e. TTY).
INV PRT SETS Requests for the Sets Inventory file to be printed out to the
output destination (i.e. TTY)
INV PRT STATUS Requests for the status of the Inventory feature.
Result may look somewhat:
Inventory status:
Card file status is Ok
43 records; 18/03/1999 17:10:21
Sets file status is Ok
19 records; 18/03/1999 16:44:09
**** Abort overlay. This command can also be used to abort
any Inventory file printing.

 

[jmedms]

The SLT option in LD 22 worked. Thanks so much for the help. I will try the LD 117 option tonight. Thanks again for all the help.