Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Meridain 81C

Status
Not open for further replies.
nikii

nikii

IS-IT--Management
Joined
Feb 27, 2002
Messages
2
Location
US
I have a Meridian 81C, which has a PBX connected via TIE trunks. What table or information does the M1 use to route a locally dialed DN to the TIE route? How does the M1 know to route the DN to the other PBX via the TIE trunks?
 
Sort by date Sort by votes
Hi
it probably uses steering codes
Colin
 
Upvote 0 Downvote
yes, but not only.
have a look in the docs concerning dialing plans. if i remember, there is explained a lot

chris
 
Upvote 0 Downvote
Steering codes is the answer. Thanks FoxTrott!
 
Upvote 0 Downvote
Where/how are the TTY ports located and identified on a Meridian 81C?
 
Upvote 0 Downvote
Hi
LD 37
.stat tty <cr>

ld 22
req prt
type adan


That should do it
Colin Colin
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Everest67
  • Locked
  • Question Question
remote access to NORTEL 81c
Replies
4
Views
752
Everest67
Everest67
Sah219
  • Locked
  • Question Question
Add 3ed network group with intergroup switch 81c
Replies
0
Views
371
Sah219
Sah219
cable_bunny
  • Locked
  • Question Question
No ringback tone from 81c PABX from Incoming TELCO CO trunk
Replies
4
Views
469
cable_bunny
cable_bunny
CALPHONELADY
  • Locked
  • Question Question
MERIDIAN OPTION 81C DC POWER - BAD BATTERIES
Replies
3
Views
347
KCFLHRC
KCFLHRC
narsman
  • Locked
  • Question Question
Tandem Calls from 61C to 81C Forwarded to Public Number Not Sending Full 10 Digits
Replies
9
Views
474
bignose21
bignose21

Part and Inventory Search

Sponsor

Back
Top