Meraki vlan configuration issue 1

[virgiliom]

Hello, we did setup a voice vlan in our meraki and everything seems right, the only issue, when the phone reboots, it stays in discovery 192.168 etc (IP500 address)

I checked out this thread

https://community.meraki.com/t5/Switching/Meraki-amp-Nortel-Avaya-IP-Deskphones/m-p/107614

I also checked the ADDR configuration pushed to the phone and it makes sense.

so not sure what to look at

thanks

 

[derfloh]

Sounds like the phone doesn't jump into the voice VLAN

IP Office remote service
IP Office certificate check
CLI based call blocking
SCN fallback over PSTN

 

[nnaarrnn]

I don't use Meraki, but for what I do use (using one DHCP server for everything), I have to have one DHCP Option 242: L2Q=1,L2QVLAN=10,VLANTEST=0 (this tells the phones to reboot and jump on vLAN10)

...and then another DHCP Option 242 specifically for vLAN10: MCIPADD=10.10.10.2,MCPORT=1720,VLANTEST=0,HTTPSRVR=10.10.10.2,HTTPPORT=80,HTTPSSRVR=10.10.10.2,HTTPSPORT=443

Hope this helps!