Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Memory
- Thread starter Stat1c
- Start date
- Thread starter
- #2
Hi
Based of CA documentation 256MB is enough to run Arcserve BUT if there are other applications running on backup server other than ARCserve then you need to put this in your consideration ,since the less memory you have will fore the OS to use paging to handle the memory requirement...
By the way the more memory you add to the server will be better.
Regards
Mohamdr
Based of CA documentation 256MB is enough to run Arcserve BUT if there are other applications running on backup server other than ARCserve then you need to put this in your consideration ,since the less memory you have will fore the OS to use paging to handle the memory requirement...
By the way the more memory you add to the server will be better.
Regards
Mohamdr
CokeandSushi
MIS
I have just set up our new Arcserve only server for backups.
It backs up 27 servers.
The spec's are
Compaq DL 390
Xeon 2.8 GHz
2 Gb RAM
And two 36Gb of HDD in a mirror.
OS Win 2000 + patches ARCSerev 2000 with more patches than the lord has sheep
Works a treat
Hope this helps.
It backs up 27 servers.
The spec's are
Compaq DL 390
Xeon 2.8 GHz
2 Gb RAM
And two 36Gb of HDD in a mirror.
OS Win 2000 + patches ARCSerev 2000 with more patches than the lord has sheep
Works a treat
Hope this helps.
- Status
Similar threads
- Locked
- Question
- Locked
- Question