Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Memory Requirements for T1

Status
Not open for further replies.
crleacock

crleacock

Vendor
Nov 29, 2001
33
US
I've got an external CSU/DSU that is connected to a router via serial cable. Right now it's got a 256k connection coming into it for frame-relay. We want to upgrade to a full T1 line and I'm having problems communicating with the CSU/DSU whenever we switch. (We tried it last Friday). The CSU/DSU was correctly configured and I believe everything in the router was correct. Is there a certain amount of memory required in the router to handle a full T1? Any help would be appreciated.

Chris
 
Status
Not open for further replies.

Similar threads

jarod_paris
  • Locked
  • Question
firmware for an AP2800 WiFi terminal
Replies
0
Views
271
jarod_paris
jarod_paris
disk-us
  • Locked
  • Question
RTU licensing for a901
Replies
0
Views
129
disk-us
disk-us
Willi DB
  • Locked
  • Question
Polycom410 Forward an incoming call
Replies
0
Views
142
Willi DB
Willi DB
MoJHK
  • Locked
  • Question
UAT for Cisco C9200
Replies
0
Views
112
MoJHK
MoJHK
acabezas2014
  • Locked
  • Question
Need to create QoS for SNMP and Radius traffic on Cisco 4948 Switches
Replies
0
Views
129
acabezas2014
acabezas2014

Part and Inventory Search

Sponsor

Back
Top