We've recieved this message in the past, probably three times in the past year and a half. The message has been slightly varied but pretty much referring to memory errors. Does anyone have any suggestions as to what our best line of action should be. Do we need to replace SIMMS? Is the unit over-heating? Are we in danger of the computer coming to a grinding halt?
Here is the message:
PANIC: IRIX Killed due to Memory Error in SIMM S10
at Physical Address 0x9cb1028 PC: 0x88aee58 ep: 0xffffcb98
Memory Configuration registers: 0x2f202f30/0x0, Data:0x150x0
Dumping to dev 0x2000011 at block 0, space: 0x27ba pages
Dumping low memory...
Dumping unmapped memory from page 0x4 to page 0x3d5........
Dumping Kernal pages...............
Dumping remaining in-use pages................
Available dump space depleted.
flushing out buffers
Updating dump header.
Dump complete.
[Press reset to restart the machine.]
We have an SGI Indigo2 running IRIX 6.2
Thank you very much for any advice.
Dennis
Here is the message:
PANIC: IRIX Killed due to Memory Error in SIMM S10
at Physical Address 0x9cb1028 PC: 0x88aee58 ep: 0xffffcb98
Memory Configuration registers: 0x2f202f30/0x0, Data:0x150x0
Dumping to dev 0x2000011 at block 0, space: 0x27ba pages
Dumping low memory...
Dumping unmapped memory from page 0x4 to page 0x3d5........
Dumping Kernal pages...............
Dumping remaining in-use pages................
Available dump space depleted.
flushing out buffers
Updating dump header.
Dump complete.
[Press reset to restart the machine.]
We have an SGI Indigo2 running IRIX 6.2
Thank you very much for any advice.
Dennis
