I have a MICS 0x32 with a 4.1 XC ROM Cart., 2 analog trunk cards, and 2 6 port fiber cards (one is a combo). 5 trunk Mods with 3 analog trunk cards each, fiber applications module, and 6 station modules.
ports are setup as follows : (card1: ports 9-14 card2: 3-8)
3-Application Module 4-Trunk 5-Trunk 6-Trunk 7-Trunk 8-Trunk
9-Station 10-Station 11-Station 12-Station 13- Station 14-Station
PROBLEM: Ports 13 and 14 are recognizing the station modules, I have checked the Fiber cards and double checked my configuration. I have swapped the station modules on 13 and 14 to a different port but they work. The only things I have left is the 0x32 and the rom which I will be swapping the 0x32 tomorrow to see if that is it. Hopefully someone has had a similar problem. Another small problem is the applications module not coming up (but I think I just need another hard boot on it [though it isn't "singing"]).
ports are setup as follows : (card1: ports 9-14 card2: 3-8)
3-Application Module 4-Trunk 5-Trunk 6-Trunk 7-Trunk 8-Trunk
9-Station 10-Station 11-Station 12-Station 13- Station 14-Station
PROBLEM: Ports 13 and 14 are recognizing the station modules, I have checked the Fiber cards and double checked my configuration. I have swapped the station modules on 13 and 14 to a different port but they work. The only things I have left is the 0x32 and the rom which I will be swapping the 0x32 tomorrow to see if that is it. Hopefully someone has had a similar problem. Another small problem is the applications module not coming up (but I think I just need another hard boot on it [though it isn't "singing"]).
