After changing drives from LTO2 to LTO4 we've had some problems with backup to tape
Seems like every time we start a backup to tape the medium changer disappears from device manager and backup to tape fails.
We reboot the server, Medium changer comes back up and fails again when starting backup
(The device 'Unknown Medium Changer' (SCSI\Changer&Ven_STK&Prod_L180&Rev_0318\5&11b4bfba&0&000000) disappeared from the system without first being prepared for removal)
We are running a 2003 server (64 bit). Veritas Netbackup 6.5.3
L180-robot (upgraded with latest firmware)
Any solutions to this?
Seems like every time we start a backup to tape the medium changer disappears from device manager and backup to tape fails.
We reboot the server, Medium changer comes back up and fails again when starting backup
(The device 'Unknown Medium Changer' (SCSI\Changer&Ven_STK&Prod_L180&Rev_0318\5&11b4bfba&0&000000) disappeared from the system without first being prepared for removal)
We are running a 2003 server (64 bit). Veritas Netbackup 6.5.3
L180-robot (upgraded with latest firmware)
Any solutions to this?