Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MDS C9509 swap active/standby supervisors

Status
Not open for further replies.
Grogo

Grogo

MIS
Jun 28, 2001
11
US
Ok, I've been out of the game since the CAT OS days and I can't find anything on Cisco.com. I need to test fail-over between the sups but cannot find a command to do so. Anyone familiar with these? My bailiwick is the Catalyst series, not SAN. thanks.
 
Sort by date Sort by votes
The command system switchover will force the switch to swap active and standby supervisors.
 
Upvote 0 Downvote
So you want to test failover of the MDS 9509, not a Cat6509?

BuckWeet
 
Upvote 0 Downvote
Yes, I am working with a MDS 9505. Hopefully the command dtobin referrenced is available on this IOS.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

nelsonsk2
  • Locked
  • Question
VLAN and Active Directory
Replies
2
Views
62
nelsonsk2
nelsonsk2
bobbyforhire
  • Locked
  • Question
Cisco ACS. Using Radius and Active Directory
Replies
0
Views
46
bobbyforhire
bobbyforhire
Ian1Tek
  • Locked
  • Question
Vlans not active between HP procurve and Cisco
Replies
5
Views
61
chieftan
chieftan
eiregobragh
  • Locked
  • Question
4507R with 2 supervisors
Replies
6
Views
41
eiregobragh
eiregobragh
StorageEMC
  • Locked
  • Question
Anybody know about cisco MDS switch(Fabric Switch)
Replies
2
Views
33
theravager
theravager

Part and Inventory Search

Sponsor

Back
Top