md110

[zibi11]

I wanted to broadcast authorization telephone to exit conversations
how to block exit on two numbers 2102222 and 221223333

excac:dir=????????????

 

[HIREI]

Hi,
stupid method - you should use nacds and appropriate tcdcats on the phone. But the table will be huge. May be now exists more sophisticated methods?

 

[zibi11]

interesting
really I begin from md110
maybe you will pass example ??

 

[HIREI]

Very interesting

CALL DISCRIMINATION DATA
EXTERNAL/INTERNAL NUMBER CAT
05001 5
05002 5
05003 5

The numbers, beginning from 05001 and so on can dial only extensions with tcdcat = 5.

Ext with traf=03141415 can't do it.

 

[HIREI]

I.e., in the example above exts with traf=03050515 can dial numbers, beginning with 05001 etc where 05 is dest.

So, not to dial 050011 by ext with 03141415, day and night:

050010 5 14
050011 5
050012 5 14
and so on . If we need 052 to dial by the two ext etc we should note this:
052 5 14

So in MD110 BC9.

 

[HIREI]

Also refer to:

http://www.tek-tips.com/viewthread.cfm?qid=1012748&page=1

 

[zibi11]

what is this for categories 0-14 was one should it it will make
CDCAT 0-14 TCD category CALL DISCRIMINATION

 

[HIREI]

You can assign this categories to subscriber, and if we have "CALL DISCRIMINATION DATA EXTERNAL/INTERNAL NUMBER" table in nadap; programmed, it will work.