Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
MD110 transit capacity law
- Thread starter HIREI
- Start date
- Thread starter
- #2
whosrdaddy
Vendor
single lim systems only can handle 12 setups per 10 seconds.
multi lim systems handle 9 setups per 10 seconds per lim.
-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
multi lim systems handle 9 setups per 10 seconds per lim.
-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
whosrdaddy
Vendor
I know the MX-ONE candle 50 calls per 10 seconds
-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
whosrdaddy
Vendor
indeed there was an increase,
this is what ALEX BC12SP7 has to say :
[tt]
13 Traffic capacity
These values are applicable for ASB 501 04 systems with:
Single LIM, two LIMs or multi-LIM systems with Group Switch GBP10.
Minimum two PCM links between LIMs with this capacity for a two LIM system or LIMs with this capacity and the Group Switch in a multi-LIM system.
Call Information Logging via Ethernet and set up for 10 Kbytes buffers.
If ACD, IP or Mobile Extensions are in use, this has to be calculated separately.
The ASB 501 04 is designed for a traffic capacity of 0.2 erlang/extension.
BHCC Busy Hour Call Completion
The number of completed calls in an uninterrupted period of one hour during which the average intensity of traffic is at its maximum.
BHCC, for the individual LIM = 1.8 calls/second.
BHCA Busy Hour Call Attempts
The number of attempted calls in an uninterrupted period of one hour during which the average intensity of traffic is at its maximum.
The BHCA value is 10 times the BHCC value.
[/tt]
so it's not 20 calls but 18 calls per 10 seconds if the recommendations above are followed
-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
this is what ALEX BC12SP7 has to say :
[tt]
13 Traffic capacity
These values are applicable for ASB 501 04 systems with:
Single LIM, two LIMs or multi-LIM systems with Group Switch GBP10.
Minimum two PCM links between LIMs with this capacity for a two LIM system or LIMs with this capacity and the Group Switch in a multi-LIM system.
Call Information Logging via Ethernet and set up for 10 Kbytes buffers.
If ACD, IP or Mobile Extensions are in use, this has to be calculated separately.
The ASB 501 04 is designed for a traffic capacity of 0.2 erlang/extension.
BHCC Busy Hour Call Completion
The number of completed calls in an uninterrupted period of one hour during which the average intensity of traffic is at its maximum.
BHCC, for the individual LIM = 1.8 calls/second.
BHCA Busy Hour Call Attempts
The number of attempted calls in an uninterrupted period of one hour during which the average intensity of traffic is at its maximum.
The BHCA value is 10 times the BHCC value.
[/tt]
so it's not 20 calls but 18 calls per 10 seconds if the recommendations above are followed
-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
- Status
