MD110 to FCT analog trunk connection

[rfpup]

Based on the following thread: thread806-914019 Can someone give an roddp example? ADC parameters

 

[singhbrindisi]

Hi,

try this:

<roddp:dest=076;
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
076 176 0005000000000250000000000 0 1 0

Cheers,

""The truth about action must be known and the truth of inaction also must be known; even so the truth about prohibited action must be known. For mysterious are the ways of action""

 

[rfpup]

Thank you SinghBrindisi,

I am still not succeding in the route configuration.
The FCT are EcoTEL GSM A1 model.
Can anyone help me about it?

 

[rfpui]

Where is and what a problem?

----------------------------------
If anything can go wrong, it will.
(Murphy's Law)

 

[rfpup]

I need to configure a route with two analog trunks inside it towards two FCT EcoTEL GSM A1
These is my corrent configuration but it doesn't work

[tt]<rocap:ROU=1;ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
1 7120000100000010 5 0000000000 0 30 128 00151515 000000000000 001100

END

<rodap:ROU=1;ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
1 TL11 H'00000120 H'00000188 H'00002815 NO

END

<roddpEST=444;EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
444 1 0005000000000250000000000 0 4 0

END

<[/tt]

I have tried also this one but again no success:

[tt]<ROCAP:ROU=1;ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
1 0110000000000010 4 3100000000 0 30 128 03151515 400000000000 001100

END

<RODAP:ROU=1;ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
1 TL11 H'00000012 H'00000108 H'00000015 NO[/tt]