Md110 to cisco calls not working

[Njoro82]

Hi team,
Am having problems calling Cisco IP phones from md110 tsw7, Below are my config on MD110.
The route 40 connects to several (6) BP250 and they work fine.
Am separating several trunks (1-1&&1-8) to connect to Cisco call Manager and am experiencing below problems
1. There is no ring tone from md110 to cisco,a call appears on cisco phone but a caller cannot hear the ring.
2. Both the caller and the receiver cannot communicate (they can’t hear each other) when a call is received.
3. Calls from cisco to md110 are successful
My extensions ranges are 4 digits.
Kindly guide me on where I could be going wrong.

<NANLS :EXL=34,MIN=5,MAX=5;
EXECUTED

<ROCAP:ROU=40;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
40 7110000000000010 4 3110000001 0 30 128 03151515 511100000090 111111

END

<RODAP:ROU=40;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
40 TL65 H'00000101 H'00000011 H'00000000 NO

END

<ROEDP:ROU=40,TRU=ALL;
ROUTE EQUIPMENT DATA
ROU TRU EQU IP ADDRESS SQU INDDAT CNTRL
40 001-1 10.131.229.254
40 001-2 10.131.229.254
40 001-3 10.131.229.254
40 001-4 10.131.229.254
40 001-5 10.131.229.254
40 001-6 10.131.229.254
40 001-7 10.131.229.254
40 001-8 10.131.229.254
END
<RODDPEST=34;
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
34 40 160610000000025000000000000 0 2 0

END
<RODDPEST=34,IPOPT=YES;
EXTERNAL DESTINATION ROUTE DATA
DEST ROU IP ADDRESS RROUID
34 40 10.131.229.254

END