Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
MD110 - MX-One - SMDR -CIL -TCP/IP current server ip and port
- Thread starter gsirett
- Start date
fernandomm
Technical User
Hi gsirett,
In the Mx-One, the CIL is stored in a file, and you can access it by TCP/IP.
See the command "callinfo_status_print" to know the path.
In the old MD110, you could configure it over a local port, or over a path in his hard disk (access across the NIU).
I hope this help you!
In the Mx-One, the CIL is stored in a file, and you can access it by TCP/IP.
See the command "callinfo_status_print" to know the path.
In the old MD110, you could configure it over a local port, or over a path in his hard disk (access across the NIU).
I hope this help you!
- Status
Similar threads
- Question
- Question
