MD110 connection to An other PBX via LL a CISCO

[mkhalil]

HI,
I'm looking for a solution for connecting an MD110 located in the Head Office (220 users) to an old Matra PBX in a remote site (60 users). The head office is connected to this site with an 128K Leased line for IP traffic via CISCO 3640 (Head Office) and CISCO 2610 (Remote site). Is there any options to use this link for voice ?

 

[ysgoh88]

You can used E&M tie line or Q-sig tie line to tie with the cisco at both side.this should work and cisco router should be able to provide this.

 

[MD6]

Hi,

How many connections you need at both side? Your link (128K) have free bandwith?

MD6

 

[mkhalil]

3 to 4 simultaneous connections will be OK and 40% of the bandwidth almost 50k.
Many thanks in advance for your help.

Regards,

 

[ysgoh88]

then you can just used E&M tie line,and more easy for test.