Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
md110 and business phone
- Thread starter nurulesz
- Start date
whosrdaddy
Vendor
Hi nurulsz,
I don't know which BCx version you have but from BC9 business phones are no longer supported on the md110 (this due a different firmware in the phone which send some faulty signal to the md110)
buy md110 phones and your problem is solved
greetings,
I don't know which BCx version you have but from BC9 business phones are no longer supported on the md110 (this due a different firmware in the phone which send some faulty signal to the md110)
buy md110 phones and your problem is solved
greetings,
whosrdaddy
Vendor
Hi Matovtz :
it's just the reverse thing, in BC9 & BC10 there were in a certain CNI patches included to prevent connection of BP phones. with this patch loaded you will get the phenomenon nuruleszn described. you can passivate this patch but anyway connecting a BP phone to a MD110 is not healthy since they are not 100% equal and these phones do generate many lost signals in some cases.
greetings
it's just the reverse thing, in BC9 & BC10 there were in a certain CNI patches included to prevent connection of BP phones. with this patch loaded you will get the phenomenon nuruleszn described. you can passivate this patch but anyway connecting a BP phone to a MD110 is not healthy since they are not 100% equal and these phones do generate many lost signals in some cases.
greetings
- Status
