Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MD11 alias for esternal destination

Status
Not open for further replies.

michelepin

Technical User
May 6, 2013
65
IT
Hi all,

on an MD110 BC11SP13 i need to configure a short number (1555) that redirect to an external destination (geographic number). So, calls 1555 should be redirected to xxxx.xxxxxxx.

Any hint how to do this ?

Thanks, MP

--
BLOG @
 
Hi,
use a common abbreviated dialing number.
1.) NANSI:NUMSE=1555,NUMTYP=AC;
2.) ADCOI:ABB=1555,CLASS=0&1&2&3,TRA=xxxx-xxxxxxxx;
--> everyone can dial 1555. (internal and also external)

--> If you don`t want that all user can dial this number you can restrict this with the CLASS-parameter
--> e.g. use CLASS=3 and change the TRAFF-parameter for the user, who are allowed to dial this number.
regards,
Norbert
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top