Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
MD Evolution S_ME S_MEPW 1
- Thread starter TeleLion
- Start date
-
1
- #2
aastratech
Technical User
TeleLion, try setting the type = S_ME or S_MEPW as a fictive number on an analogue port ie 0-11 etc.. I think only Type = Mobile should be set up on port 0-0.
- Thread starter
- #3
OK here are teh reults,
when using TLG 8.01 you can assign S_ME on 0/0, TLG 8.1c & TLG 8.1d, you can not assign S_ME or S_MEPW on 0/0, but you can assign anywhere else excpet for 0/0.
Thank you MDEvo
To MD or not to MD that is the question
when using TLG 8.01 you can assign S_ME on 0/0, TLG 8.1c & TLG 8.1d, you can not assign S_ME or S_MEPW on 0/0, but you can assign anywhere else excpet for 0/0.
Thank you MDEvo
To MD or not to MD that is the question
aastratech
Technical User
thanks Telelion,
yet again why cant /// tell us when they release updates to administration tools what the changes actually are.
yet again why cant /// tell us when they release updates to administration tools what the changes actually are.
- Status
