MD 110 call trace log 1

[FLORINGUINEA]

Hello. Does anyone know the command for how to put a trace on an analog extention? Thanks a lot!

 

[parnum]

STISR;
STDNIIR=xxxx;
STTSS:TRI=1,SIZE=1000;
STTSI:TRI=1;

make the call

STTSE:TRI=1;

open the logfile

STRAP:TRI=1;

Run it through SA-DPNSS

Long time since i've done that, amazing what you never forget!

best parnum

 

[FLORINGUINEA]

Hello Parnum.

Thanks for your help. Please explain what is SA-DPNSS.
Kindest regards.

 

[himdp]

SA-DPNSS is s Windows program for decoding TLP50 traces into DPNSS messages and has no relevence to analogue extension calls (Unless the call is via a DPNSS tie line)

 

[parnum]

You can run a TLP50 STUNI or a STDNI through SA-DPNNS as far as I recall (but it's been a long time!). It translates DASS and DPNSS from TLP50

best parnum

 

[himdp]

Absolutely correct regarding SA-DPNSS decoding TL50 signals from MD110, TSW and TSE to DASS and DPNSS. My point was that the original post requested how mto trace oin an analogue extension and made no mention of anything to do with those signalling systems. Also, if the original poster is outside the UK he probably has no interest in SA-DPNSS at all.