mcs 7835 box with dual hard drives will not boot

[tekt1p5]

I had a functional server running callmanager software on it. My little son yanked one of the harddrives out with the system running (NOT hot swaps).The server stalls on the boot. I get an error that contains something like this:”0000000007B “when I try. I have another server (same model). I tried inserting the corrupted drives on the other server and I can read the data on them fine. I however don’t know how to get the CM application to launch from there .I need this callmanager application desperately and I have no back up of it.

-Compaq MCS 7835
-Windows 2000 OS
-4 HD slots each server
-2 Hard drives each server
-No OS CDs or any RAID CDs

Anyone with suggestions on how I can get my call manager back running ?

 

[wolluf]

First I'd boot into recovery console and run chkdsk C: /r

http://support.microsoft.com/default.aspx?scid=kb;en-us;229716

Reboot and see if any better.

If not, I'd run a repair reinstall:-

http://support.microsoft.com/default.aspx?scid=kb;en-us;292175&Product=win2000

 

[ndworld]

I have an issue with a 98 and it is not finding my secondary drive unless on slave and I still cannot see the drive. I reapparitioned it to have no software and just be a storage drive but still only when it shows me at the first screen with the memory test . What should I do to be able to see it under my computer and store items?

 

[ndworld]

it is also running on windows xp

 

[wolluf]

ndworld

Can you please start your own new thread for your question.
And can you clarify what you are asking - I can't understand it! (so suspect others won't either).

Explain your setup properly, what you have done/what you are trying to do, and how its not working - with error messages if appropriate. I don't know if you have one or two machines (or more) running 98 or XP. Just a problem with 'secondary drives'.

Are they (Is it) slaves on primary or masters on secondary controller?

How partitioned/what filestore(s)?