Trying to MCR a DN on 3 phones. It as a MARP on a 500 series phone in addition to these. I try to chg the SCR key to MCR and get error SCH0600. I have done this before successfully but this one has me baffled (it doesn't take much sometimes...). Thanks for any help!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations John Tel on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
MCR difficulties
- Thread starter JEFBEL
- Start date
1norteltech
Programmer
You have to remove all SCR appearances first and then program as MCR.
- Thread starter
- #3
bigindian65
Technical User
yes, ALL appearences.
If you want to have a Multiple Call Arrangement (i.e. being able to make calls on both the analog and digital set at the same time), then build the analog set first with CLS=MCRA and then build the digital set with KEY xx MCR yyyy AFTER the analogue.
Mato' Was'aka
If you want to have a Multiple Call Arrangement (i.e. being able to make calls on both the analog and digital set at the same time), then build the analog set first with CLS=MCRA and then build the digital set with KEY xx MCR yyyy AFTER the analogue.
Mato' Was'aka
- Thread starter
- #5
- Status
Similar threads
- Locked
- Question