MCK e-6000

[commtechMT]

I just recieved a pair of MCK -E 6000g's. I would like to hook these together on the bench so I can prep them for use. We are using the WAN1 connection programmed for v.35 between sites. Do i need a straight through cable or a null cable to get these two talking?

 

[whender]

Not certain where you are going to get clock and T1 transmission simulation. Not certain this can be done. Probably better to hook them up on LAN, not hard, and get everything to working. That would only leave WAN parameters if there were a problem.

Hooked a few of these up, but never tried to simulate V35 interface.

 

[curlycord]

Citel support # 1-877-248-3587 , they can answer in a heart beat.
Usually straight through for MCK if I recall.



=----(((((((((()----=
curlycord

http://www.curlycord.com

Toronto Canada

http://www.telcopc.ca