Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MCK 1000 extender LED sequences

Status
Not open for further replies.

telecomPA

MIS
Jul 9, 2007
413
0
0
US
hi all, is it possible to tell from the LED sequences, whether or not an MCK 1000 switch module is good?

i've tested several of them and have one at my desk right now where the led sequence is yellow, red, yellow, yellow.

i've tested other switch modules where the led sequence is yellow, red, green.

so i don't know if some of them are bad or if the led's are supposed to be different.

if you've worked on these, can u give me your 2 cents?

 
if you post in the MCK/CITEL forum you might get more feed back....

old book, I'll look around but had not seen it for a few years now....

i would have to assume, that you will never know, util you use it.... if it powers up and passes internal tests, it might still have issues....


__________________________________________________________
Find a job you love and you'll never work a day in your life. - Confucius
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top