Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

MCD 5.0 SP1 Personal Contact Numbers Fails

Status
Not open for further replies.

ipPhoneman

Vendor
Jun 27, 2012
4
US

Personal contact numbers for cell phone does not transfer to cell. Call goes to auto Attendent and plays prompt invalid mail box number. Trunk to trunk transfer works well. Calls can be transfered though a menu mail box to a speed dial off site which works well.
 
the COS of the VM port must have Non-Verified Account Codes enabled and the Account code length must match the number of digits in the voicemail extension. Otherwise the maximum number of outbound digits is 7

**********************************************
What's most important is that you realise ... There is no spoon.
 
This is all correct, but I am unsure if I really need to reboot the controller after I added the Non-verified account code access code.
 
No

I'm not sure what you mean with respect to adding a non verified account code. There's nothing to add, it's non- verified nothing to match.

If the vm port is capable of calling out then you only need the option enabled and the digit length to match

**********************************************
What's most important is that you realise ... There is no spoon.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top